Recently, users of electric skateboard scooters have encountered such a problem, that is, the electric skateboard scooters are normal without load, but does not move with load. What is the reason for this? In fact, electric scooters encounter this kind of problem, is generally caused by 4 reasons.
First, we need to check whether there are some problems with the battery. If the electric scooter battery loses power or is aging, the electric skateboard scooter will be obviously weak when accelerating, and this will also cause the electric skateboard scooter to appear normal without load and unnormal with load. For this kind of situation, generally choose to use pulse repair on the battery, and if it cannot be repaired, then choose to replace the battery with a new one.
Secondly, what we need to check is the controller connection line. If the controller connection line has poor contact, the electric scooter will also run hard, and this will also cause the electric skateboard scooter to be normal without load and not move with load. In this case, the general solution is to find the poor contact and reconnect it. If the problem cannot be solved, you can choose to replace it with a new cable.
First of all, the most likely reason is that the electric skateboard motor is damaged, which makes the electric skateboard scooter run hard, and this will cause the electric skateboard scooter to be normal without load and not move loaded. How to solve this situation? The solution is also very easy, that is, just replace the new motor. Of course, pay attention to whether there is rust inside the motor, and remove it if necessary.
Finally, the electric skateboard scooter is normal without load, but does not move with load, which may be caused by the malfunction of the speed control handle. Because the speed control knob has poor contact, it will also make the electric skateboard scooter difficult and unable to run. In this case, the user can remove the speed control knob, check whether the internal connection line has a virtual connection, and reconnect it if there is any. And if the connecting wire has been corroded and aged, it needs to be replaced with a new one.
In short, the situation of "normal without load and unnormal with load" in electric skateboard scooters is generally caused by these four reasons. For users, no matter which part of them has a problem, they must be investigated and solved in time. Of course, in daily life, strengthening the maintenance of accessories such as motors, controllers, batteries, and speed control handles can also reduce the probability of such problems to a certain extent.